The power source decides where a wood chipper can work, what it costs to run and how it fits your fleet. The WEILIN range covers three options: gasoline engines, a diesel engine and a tractor PTO drive. This article compares them using the figures listed on each product page.
Gasoline Engines
Most of the range is gasoline powered. The YL212-100 uses a Loncin 212 cc engine rated at 4.4 kW with a listed fuel use of about 0.8 L/h. The 170F-200 uses a Loncin 212-series gasoline engine, also 4.4 kW, at about 0.9 L/h. The CK-300 Wheeled steps up to a Loncin 420 cc engine at 9.2 kW and about 1.2 L/h, and the CK-300 Crawler pairs a 420 cc gasoline engine rated at 13.5 HP with electric start. The first three models use recoil start.
Diesel
The 192F-200 uses a 192F diesel engine rated at 11 HP. It is positioned for long duty cycles and damp material, and it takes branches up to 100 mm at a listed 800–1,000 kg/h.
Tractor PTO
The TXCL-800 has no engine at all. It hangs on the tractor rear 3-point linkage (Category 1 / 2) and runs from the tractor PTO, with standard double-acting hydraulic circuits. There is no separate engine to buy or fuel, which makes it the volume choice for farm and municipal fleets that already run tractors.
Matching Power to the Job
- Light, occasional pruning: the YL212-100 and 170F-200 handle branches up to 50 mm and 80 mm respectively.
- Production chipping up to 100 mm: the CK-300 Wheeled and CK-300 Crawler are the gasoline options, with listed throughput of 800–1,000 kg/h and 900–1,200 kg/h.
- Long duty cycles and damp material: the diesel 192F-200.
- Fleets with tractors: the PTO-driven TXCL-800.
Specifications are quoted from the WEILIN product pages; the full specification sheet is supplied with each quotation.
Next Step
Not sure which power source suits your operation? Send us your application details and our team will help you explore suitable machinery options.